How to charge your Nintendo Switch
- Your Pre-Owned Nintendo Switch may have lost charge during shipping.
- The Nintendo Switch console requires approximately 3 hours to fully charge.
- The Nintendo Switch console can be charged in two ways.
Directly With the AC Adapter:
Connect the USB plug from the Nintendo Switch AC adapter into the USB connector on the bottom of the console, then connect the AC adapter into the wall outlet.
Using the Dock:
- Connect the Nintendo Switch AC adapter into to the Nintendo Switch dock.
- Open the back cover of the dock.
- Connect the USB plug from the AC Adapter into the top terminal of the dock labelled “AC Adapter.”
- Close the Nintendo Switch Dock cover.
- Insert the console into the Nintendo Switch dock. Important: Ensure the LCD screen is facing the same direction as the front panel of the dock.
- Connect the Nintendo Switch AC adapter into the wall outlet.
This Preowned item is an EB Games refurbished product which is not endorsed or guaranteed by its original manufacturer.
To prevent fire or shock hazard, do not expose the console to rain or moisture
To prevent fire or shock hazard, do not place a container filled with liquids on top of the Console
To avoid electrical shock, do not open the console. Refer servicing to qualified personnel only.
Do not expose the console to cigarette smoke or dust
When setting up the console, avoid places subject to excessive cigarette smoke or dust. Cigarette smoke residue or dust build-up on internal components such as the lens, may cause the console to malfunction.
Do not touch the console connections
Do not touch the metal parts or insert foreign objects into the console or the console connections.
Moisture condensation
If the console or the disc is brought directly from a cold location to a warm one, moisture may condense inside the console or on the disc. Should this occur, the console may not operate correctly. In this case, store the device in a dry area until the moisture has evaporated (this could take several hours).
Do not subject the console to violent physical shock
Do not throw or drop the console or its accessories, and do not knock the console or its accessories against other objects. When carrying the console, do not subject it to any type of violent physical shock.
This may damage the disc or cause the console to malfunction.
Avoid damaging the exterior of the console
Do not apply solvents, and do not place any rubber or vinyl materials on the surface of the console for an extended period of time. Doing so may damage the plastic surface or cause the paint to peel off.
Cleaning the exterior of the console
When cleaning the exterior of the console, be sure to turn off the power and disconnect the AC power plug from the electrical socket. Use a dry cloth: do not use abrasive pads, detergents, scouring powders, solvents (e.g. Alcohol, gasoline, paint thinner or benzene), or other liquid or aerosol cleaners.
Never disassemble the console
There are no user-serviceable components inside the console. Additionally, there is a risk of exposure of (laser) radiation as well as electrical shock hazard.
Do not place the console in an unstable location
Ensure you place the console on a surface that is flat, level and stable. Allow all four feet/stand of the console to be in contact with the surface.
Prevent the console from overheating
Do not block any ventilation openings on the console or power supply. Do not place the console or power supply on a bed sofa or other soft surface that may block ventilation openings. Do not place the console or power supply in a confined space, unless the space is well ventilated.
Do not place the console or power supply near any heat sources, such as radiators, heat registers, stoves or amplifiers.
Do not leave the console in a car with its windows closed (particularly in summer) as this may warp the exterior of the console or cause the console to malfunction
This Preowned item is an EB Games refurbished product which is not endorsed or guaranteed by its original manufacturer.